Cameo 17 mm PVDF Syringe Filters
• Polyvinylidene Difluoride (PVDF) hydrophilic membranes are ideal for use in sterilizing and clarifying filtration of biological solutions
• Provides high flow rates and throughput, low extractables, very low protein binding, and broad chemical compatibility
• Useful for a wide range of applications, including aggressive and non-aggressive solvent-based mobile phase
• Offers excellent chemical compatibility, even with aggressive acids and alcohols. The 0.22 m pore size assures removal of the contaminant size most likely to plug a UHPLC column and offers significantly better protection of your analytical results
• 17 mm CAMEO Syringe Filters provide increased throughput and speed of sample preparation
• Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples
• Increases operating pressure up to 130 psi due to the overmold that prevents sample leaking at the seam and keeps the filter unit from bursting in half
• Syringe filters are integrity-tested to ensure a proper filter fit and weld to eliminate any potential filter by-pass. Each filter is labeled with the specific filter material and pore size for easy identification even if the syringe filter is not in its original packaging
Specifications:
• Housing: Heat-sealed pure polypropylene without the use of glues or sealants
• Media: PVDF
• Autoclavable: Yes
• Prefilter: 1.0 micron binderless glass fiber
• Filtration area: 1.4 cm2
• Housing diameter: 22 mm
• Membrane diameter: 17 mm
• Holdup volume: < 15 mL
• Sample volume: < 18 mL
• Maximum operating temperature 82°C (180°F)
• Maximum operating pressure: 130 psi
• Inlet/outlet: Female luer lock / Male luer slip
Applications:
• HPLC sample preparation
• Dissolution testing
• Content uniformity
• Environmental samples
• Composite assays
• Food analysis
• Biofuel analysis
Image(s) are representative of the product group and not necessarily the individual product.
Read More
• Provides high flow rates and throughput, low extractables, very low protein binding, and broad chemical compatibility
• Useful for a wide range of applications, including aggressive and non-aggressive solvent-based mobile phase
• Offers excellent chemical compatibility, even with aggressive acids and alcohols. The 0.22 m pore size assures removal of the contaminant size most likely to plug a UHPLC column and offers significantly better protection of your analytical results
• 17 mm CAMEO Syringe Filters provide increased throughput and speed of sample preparation
• Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples
• Increases operating pressure up to 130 psi due to the overmold that prevents sample leaking at the seam and keeps the filter unit from bursting in half
• Syringe filters are integrity-tested to ensure a proper filter fit and weld to eliminate any potential filter by-pass. Each filter is labeled with the specific filter material and pore size for easy identification even if the syringe filter is not in its original packaging
Specifications:
• Housing: Heat-sealed pure polypropylene without the use of glues or sealants
• Media: PVDF
• Autoclavable: Yes
• Prefilter: 1.0 micron binderless glass fiber
• Filtration area: 1.4 cm2
• Housing diameter: 22 mm
• Membrane diameter: 17 mm
• Holdup volume: < 15 mL
• Sample volume: < 18 mL
• Maximum operating temperature 82°C (180°F)
• Maximum operating pressure: 130 psi
• Inlet/outlet: Female luer lock / Male luer slip
Applications:
• HPLC sample preparation
• Dissolution testing
• Content uniformity
• Environmental samples
• Composite assays
• Food analysis
• Biofuel analysis
Image(s) are representative of the product group and not necessarily the individual product.
• Polyvinylidene Difluoride (PVDF) hydrophilic membranes are ideal for use in sterilizing and clarifying filtration of biological solutions
• Provides high flow rates and throughput, low extractables, very low protein binding, and broad chemical compatibility
• Useful for a wide range of applications, including aggressive and non-aggressive solvent-based mobile phase
• Offers excellent chemical compatibility, even with aggressive acids and alcohols. The 0.22 m pore size assures removal of the contaminant size most likely to plug a UHPLC column and offers significantly better protection of your analytical results
• 17 mm CAMEO Syringe Filters provide increased throughput and speed of sample preparation
• Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples
• Increases operating pressure up to 130 psi due to the overmold that prevents sample leaking at the seam and keeps the filter unit from bursting in half
• Syringe filters are integrity-tested to ensure a proper filter fit and weld to eliminate any potential filter by-pass. Each filter is labeled with the specific filter material and pore size for easy identification even if the syringe filter is not in its original packaging
Specifications:
• Housing: Heat-sealed pure polypropylene without the use of glues or sealants
• Media: PVDF
• Autoclavable: Yes
• Prefilter: 1.0 micron binderless glass fiber
• Filtration area: 1.4 cm2
• Housing diameter: 22 mm
• Membrane diameter: 17 mm
• Holdup volume: < 15 mL
• Sample volume: < 18 mL
• Maximum operating temperature 82°C (180°F)
• Maximum operating pressure: 130 psi
• Inlet/outlet: Female luer lock / Male luer slip
Applications:
• HPLC sample preparation
• Dissolution testing
• Content uniformity
• Environmental samples
• Composite assays
• Food analysis
• Biofuel analysis
Image(s) are representative of the product group and not necessarily the individual product.
• Provides high flow rates and throughput, low extractables, very low protein binding, and broad chemical compatibility
• Useful for a wide range of applications, including aggressive and non-aggressive solvent-based mobile phase
• Offers excellent chemical compatibility, even with aggressive acids and alcohols. The 0.22 m pore size assures removal of the contaminant size most likely to plug a UHPLC column and offers significantly better protection of your analytical results
• 17 mm CAMEO Syringe Filters provide increased throughput and speed of sample preparation
• Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples
• Increases operating pressure up to 130 psi due to the overmold that prevents sample leaking at the seam and keeps the filter unit from bursting in half
• Syringe filters are integrity-tested to ensure a proper filter fit and weld to eliminate any potential filter by-pass. Each filter is labeled with the specific filter material and pore size for easy identification even if the syringe filter is not in its original packaging
Specifications:
• Housing: Heat-sealed pure polypropylene without the use of glues or sealants
• Media: PVDF
• Autoclavable: Yes
• Prefilter: 1.0 micron binderless glass fiber
• Filtration area: 1.4 cm2
• Housing diameter: 22 mm
• Membrane diameter: 17 mm
• Holdup volume: < 15 mL
• Sample volume: < 18 mL
• Maximum operating temperature 82°C (180°F)
• Maximum operating pressure: 130 psi
• Inlet/outlet: Female luer lock / Male luer slip
Applications:
• HPLC sample preparation
• Dissolution testing
• Content uniformity
• Environmental samples
• Composite assays
• Food analysis
• Biofuel analysis
Image(s) are representative of the product group and not necessarily the individual product.
Certificates Of Analysis
This service is currently unavailable!