Cytiva Whatman PolyVENT Integral Vent Filters
• Cytiva's Whatman PolyVENT disc filters are integral venting filters that work bidirectionally to prevent contamination from entering containers like fermentation vessels during incubation
• 0.2 µm hydrophobic PTFE air filters are ideal industrial air filter media
• Validated for 50 steam autoclave cycles; compatible with ethylene oxide (EtO)
• Testable by water break through (WBT) test or bubble point testing
• Passes USP Class VI biosafety tests for plastics
• Manufactured in clean room facilities
• Filtration area 500, 1000, and 2000 cm to support a range of venting applications
Specifications:
• Pore Size: 0.2 µm
• Filtration Media: Polytetrafluoroethylene (PTFE)
• Housing: Polypropylene (PP)
• Vent: On inlet
• Support System: Polypropylene (PP)
• Sterilization: Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization.
• Non-Pyrogenic: non-reactive
• Operating pressure max.: 2 bar - forward direction (29 psi - forward direction)
• Sealing: Heat-fused
• Flow Direction: Bidirectional
†U.S. Sales Only
Image(s) are representative of the product group and not necessarily the individual product.
Read More
• 0.2 µm hydrophobic PTFE air filters are ideal industrial air filter media
• Validated for 50 steam autoclave cycles; compatible with ethylene oxide (EtO)
• Testable by water break through (WBT) test or bubble point testing
• Passes USP Class VI biosafety tests for plastics
• Manufactured in clean room facilities
• Filtration area 500, 1000, and 2000 cm to support a range of venting applications
Specifications:
• Pore Size: 0.2 µm
• Filtration Media: Polytetrafluoroethylene (PTFE)
• Housing: Polypropylene (PP)
• Vent: On inlet
• Support System: Polypropylene (PP)
• Sterilization: Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization.
• Non-Pyrogenic: non-reactive
• Operating pressure max.: 2 bar - forward direction (29 psi - forward direction)
• Sealing: Heat-fused
• Flow Direction: Bidirectional
†U.S. Sales Only
Image(s) are representative of the product group and not necessarily the individual product.
• Cytiva's Whatman PolyVENT disc filters are integral venting filters that work bidirectionally to prevent contamination from entering containers like fermentation vessels during incubation
• 0.2 µm hydrophobic PTFE air filters are ideal industrial air filter media
• Validated for 50 steam autoclave cycles; compatible with ethylene oxide (EtO)
• Testable by water break through (WBT) test or bubble point testing
• Passes USP Class VI biosafety tests for plastics
• Manufactured in clean room facilities
• Filtration area 500, 1000, and 2000 cm to support a range of venting applications
Specifications:
• Pore Size: 0.2 µm
• Filtration Media: Polytetrafluoroethylene (PTFE)
• Housing: Polypropylene (PP)
• Vent: On inlet
• Support System: Polypropylene (PP)
• Sterilization: Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization.
• Non-Pyrogenic: non-reactive
• Operating pressure max.: 2 bar - forward direction (29 psi - forward direction)
• Sealing: Heat-fused
• Flow Direction: Bidirectional
†U.S. Sales Only
Image(s) are representative of the product group and not necessarily the individual product.
• 0.2 µm hydrophobic PTFE air filters are ideal industrial air filter media
• Validated for 50 steam autoclave cycles; compatible with ethylene oxide (EtO)
• Testable by water break through (WBT) test or bubble point testing
• Passes USP Class VI biosafety tests for plastics
• Manufactured in clean room facilities
• Filtration area 500, 1000, and 2000 cm to support a range of venting applications
Specifications:
• Pore Size: 0.2 µm
• Filtration Media: Polytetrafluoroethylene (PTFE)
• Housing: Polypropylene (PP)
• Vent: On inlet
• Support System: Polypropylene (PP)
• Sterilization: Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization.
• Non-Pyrogenic: non-reactive
• Operating pressure max.: 2 bar - forward direction (29 psi - forward direction)
• Sealing: Heat-fused
• Flow Direction: Bidirectional
†U.S. Sales Only
Image(s) are representative of the product group and not necessarily the individual product.
Certificates Of Analysis
This service is currently unavailable!