Barnstead/Thermolyne EASYpure II Deionization Units
• Flow rates of up to 1.5 L per minute can be achieved, depending on feedwater pressure
• Ideal for laboratories requiring a low cost ultrapure water system
• Microprocessor-controlled purity monitor provides digital resistivity readings, temperature compensated to 25°C
• Water exceeds all ASTM, NCCLS and CAP Type 1 water standards
• Feedwater must be pretreated by reverse osmosis, distillation or deionization
• Standby mode recirculates the purified water for 10 minutes every hour of inactivity
• Water remains clean and free from contamination. Incorporates an absolute 0.2 micron hollow fiber final filter providing water free of particles and bacteria
• 120 VAC.
Note: Maximum flow rates dependent upon minimum inlet pressure of 30 psig and 60 Hz electricity
Image(s) are representative of the product group and not necessarily the individual product.
Read More
• Ideal for laboratories requiring a low cost ultrapure water system
• Microprocessor-controlled purity monitor provides digital resistivity readings, temperature compensated to 25°C
• Water exceeds all ASTM, NCCLS and CAP Type 1 water standards
• Feedwater must be pretreated by reverse osmosis, distillation or deionization
• Standby mode recirculates the purified water for 10 minutes every hour of inactivity
• Water remains clean and free from contamination. Incorporates an absolute 0.2 micron hollow fiber final filter providing water free of particles and bacteria
• 120 VAC.
Note: Maximum flow rates dependent upon minimum inlet pressure of 30 psig and 60 Hz electricity
Image(s) are representative of the product group and not necessarily the individual product.
• Flow rates of up to 1.5 L per minute can be achieved, depending on feedwater pressure
• Ideal for laboratories requiring a low cost ultrapure water system
• Microprocessor-controlled purity monitor provides digital resistivity readings, temperature compensated to 25°C
• Water exceeds all ASTM, NCCLS and CAP Type 1 water standards
• Feedwater must be pretreated by reverse osmosis, distillation or deionization
• Standby mode recirculates the purified water for 10 minutes every hour of inactivity
• Water remains clean and free from contamination. Incorporates an absolute 0.2 micron hollow fiber final filter providing water free of particles and bacteria
• 120 VAC.
Note: Maximum flow rates dependent upon minimum inlet pressure of 30 psig and 60 Hz electricity
Image(s) are representative of the product group and not necessarily the individual product.
• Ideal for laboratories requiring a low cost ultrapure water system
• Microprocessor-controlled purity monitor provides digital resistivity readings, temperature compensated to 25°C
• Water exceeds all ASTM, NCCLS and CAP Type 1 water standards
• Feedwater must be pretreated by reverse osmosis, distillation or deionization
• Standby mode recirculates the purified water for 10 minutes every hour of inactivity
• Water remains clean and free from contamination. Incorporates an absolute 0.2 micron hollow fiber final filter providing water free of particles and bacteria
• 120 VAC.
Note: Maximum flow rates dependent upon minimum inlet pressure of 30 psig and 60 Hz electricity
Image(s) are representative of the product group and not necessarily the individual product.
Certificates Of Analysis
This service is currently unavailable!