Labconco* XPert* Filtered Balance Systems
• Deep 23.4 or 30 in. interior to accommodate large micro and analytical balances
• Ergonomic air foil with aerodynamic Clean-Sweep* airflow openings
• Upper dilution air supply
• Upper containment sash foil
• Zone-perforated, pivoting rear baffle
• Side-entry air foils
• Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size (5 and 6 ft. models require two)
• True bag-in/bag-out filter disposal system
• Replacement bag for bag-in/bag out HEPA filter available (5 and 6 ft. models require two)
• Built-in blower with dynamically-balanced, vibration-isolated, motorized impeller and speed control (remote blowers available separately)
• Intrinsically safe, negative pressure design
• Front-mounted pressure gauge helps determine HEPA filter loading
• Space-saving design requires no separate filtered exhauster
• Upper diffuser screen
• Quiet operation from 48 - 69 db(A) depending on airflow and size of enclosure
• Glacier white and gray, powder-coated aluminum frame & steel rear plenum and baffle
• Pre-wired fluorescent lamp and switches for blower and light
• 1/4 in. thick tempered safety glass in front sash and sides
• 9.4 or 12.0 in. high sash opening
• Ergonomic, angled, and hinged sash pivots upward, locks for loading and has a wiping seal to contain contaminants
• Sashes on 5 and 6 ft. models incorporate an external gas-assist lift
• Two utility ports
• Particulate containment independently verified
• Models include choice of LED or digital airflow monitor
• 5 and 6 ft. models with 35.5 in. exterior depth include a left-side mounted waste chute (bags not included); minimum bag size required is 10 x 16 in.
• All listed models below are 115V, 60 Hz (230V models are available with CE Conformity Marking)
Read More
• Ergonomic air foil with aerodynamic Clean-Sweep* airflow openings
• Upper dilution air supply
• Upper containment sash foil
• Zone-perforated, pivoting rear baffle
• Side-entry air foils
• Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size (5 and 6 ft. models require two)
• True bag-in/bag-out filter disposal system
• Replacement bag for bag-in/bag out HEPA filter available (5 and 6 ft. models require two)
• Built-in blower with dynamically-balanced, vibration-isolated, motorized impeller and speed control (remote blowers available separately)
• Intrinsically safe, negative pressure design
• Front-mounted pressure gauge helps determine HEPA filter loading
• Space-saving design requires no separate filtered exhauster
• Upper diffuser screen
• Quiet operation from 48 - 69 db(A) depending on airflow and size of enclosure
• Glacier white and gray, powder-coated aluminum frame & steel rear plenum and baffle
• Pre-wired fluorescent lamp and switches for blower and light
• 1/4 in. thick tempered safety glass in front sash and sides
• 9.4 or 12.0 in. high sash opening
• Ergonomic, angled, and hinged sash pivots upward, locks for loading and has a wiping seal to contain contaminants
• Sashes on 5 and 6 ft. models incorporate an external gas-assist lift
• Two utility ports
• Particulate containment independently verified
• Models include choice of LED or digital airflow monitor
• 5 and 6 ft. models with 35.5 in. exterior depth include a left-side mounted waste chute (bags not included); minimum bag size required is 10 x 16 in.
• All listed models below are 115V, 60 Hz (230V models are available with CE Conformity Marking)
• Deep 23.4 or 30 in. interior to accommodate large micro and analytical balances
• Ergonomic air foil with aerodynamic Clean-Sweep* airflow openings
• Upper dilution air supply
• Upper containment sash foil
• Zone-perforated, pivoting rear baffle
• Side-entry air foils
• Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size (5 and 6 ft. models require two)
• True bag-in/bag-out filter disposal system
• Replacement bag for bag-in/bag out HEPA filter available (5 and 6 ft. models require two)
• Built-in blower with dynamically-balanced, vibration-isolated, motorized impeller and speed control (remote blowers available separately)
• Intrinsically safe, negative pressure design
• Front-mounted pressure gauge helps determine HEPA filter loading
• Space-saving design requires no separate filtered exhauster
• Upper diffuser screen
• Quiet operation from 48 - 69 db(A) depending on airflow and size of enclosure
• Glacier white and gray, powder-coated aluminum frame & steel rear plenum and baffle
• Pre-wired fluorescent lamp and switches for blower and light
• 1/4 in. thick tempered safety glass in front sash and sides
• 9.4 or 12.0 in. high sash opening
• Ergonomic, angled, and hinged sash pivots upward, locks for loading and has a wiping seal to contain contaminants
• Sashes on 5 and 6 ft. models incorporate an external gas-assist lift
• Two utility ports
• Particulate containment independently verified
• Models include choice of LED or digital airflow monitor
• 5 and 6 ft. models with 35.5 in. exterior depth include a left-side mounted waste chute (bags not included); minimum bag size required is 10 x 16 in.
• All listed models below are 115V, 60 Hz (230V models are available with CE Conformity Marking)
• Ergonomic air foil with aerodynamic Clean-Sweep* airflow openings
• Upper dilution air supply
• Upper containment sash foil
• Zone-perforated, pivoting rear baffle
• Side-entry air foils
• Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size (5 and 6 ft. models require two)
• True bag-in/bag-out filter disposal system
• Replacement bag for bag-in/bag out HEPA filter available (5 and 6 ft. models require two)
• Built-in blower with dynamically-balanced, vibration-isolated, motorized impeller and speed control (remote blowers available separately)
• Intrinsically safe, negative pressure design
• Front-mounted pressure gauge helps determine HEPA filter loading
• Space-saving design requires no separate filtered exhauster
• Upper diffuser screen
• Quiet operation from 48 - 69 db(A) depending on airflow and size of enclosure
• Glacier white and gray, powder-coated aluminum frame & steel rear plenum and baffle
• Pre-wired fluorescent lamp and switches for blower and light
• 1/4 in. thick tempered safety glass in front sash and sides
• 9.4 or 12.0 in. high sash opening
• Ergonomic, angled, and hinged sash pivots upward, locks for loading and has a wiping seal to contain contaminants
• Sashes on 5 and 6 ft. models incorporate an external gas-assist lift
• Two utility ports
• Particulate containment independently verified
• Models include choice of LED or digital airflow monitor
• 5 and 6 ft. models with 35.5 in. exterior depth include a left-side mounted waste chute (bags not included); minimum bag size required is 10 x 16 in.
• All listed models below are 115V, 60 Hz (230V models are available with CE Conformity Marking)
Certificates Of Analysis
This service is currently unavailable!
