MTC Bio* 5 mL MacroTubes*
• MTC Bio's 5 mL MacroTubes* take all the convenience of standard 1.5 mL tubes and scales them up for larger volumes
• These polypropylene tubes come with an attached cap that not only provides a tight, leak proof seal, it can also be effortlessly opened (or closed) with one hand
• The cap is designed to provide a secure seal from -86 to +80°
• At temperatures above 80°C use of a CapLock Clip* is recommended (available separately, Cat. No. 971-84059)
• The tubes are made of maximum clarity, low-binding virgin polypropylene
• Certified RNase and DNase free
• Sterile tubes (Cat. No. 971-84047) are also pyrogen free
• The 16 mm tube diameter is identical to the diameter of standard 15 mL tubes, which insures compatibility with standard centrifuge rotors, dry bath blocks, tube racks, and thermal shakers/vortexers
• The potential contamination of pipettor shafts is greatly reduced because the 56 mm total tube length (vs. 120 mm for standard 15 mL tubes) is short enough for standard 1 mL or 5 mL tips to reach the tube's conical bottom
• Compatible with standard equipment
• Withstands up to 25,000 x g†
• Dual graduations at every 0.2 mL and 0.5 mL
†When properly supported in appropriate rotor
Image(s) are representative of the product group and not necessarily the individual product.
Read More
• These polypropylene tubes come with an attached cap that not only provides a tight, leak proof seal, it can also be effortlessly opened (or closed) with one hand
• The cap is designed to provide a secure seal from -86 to +80°
• At temperatures above 80°C use of a CapLock Clip* is recommended (available separately, Cat. No. 971-84059)
• The tubes are made of maximum clarity, low-binding virgin polypropylene
• Certified RNase and DNase free
• Sterile tubes (Cat. No. 971-84047) are also pyrogen free
• The 16 mm tube diameter is identical to the diameter of standard 15 mL tubes, which insures compatibility with standard centrifuge rotors, dry bath blocks, tube racks, and thermal shakers/vortexers
• The potential contamination of pipettor shafts is greatly reduced because the 56 mm total tube length (vs. 120 mm for standard 15 mL tubes) is short enough for standard 1 mL or 5 mL tips to reach the tube's conical bottom
• Compatible with standard equipment
• Withstands up to 25,000 x g†
• Dual graduations at every 0.2 mL and 0.5 mL
†When properly supported in appropriate rotor
Image(s) are representative of the product group and not necessarily the individual product.
• MTC Bio's 5 mL MacroTubes* take all the convenience of standard 1.5 mL tubes and scales them up for larger volumes
• These polypropylene tubes come with an attached cap that not only provides a tight, leak proof seal, it can also be effortlessly opened (or closed) with one hand
• The cap is designed to provide a secure seal from -86 to +80°
• At temperatures above 80°C use of a CapLock Clip* is recommended (available separately, Cat. No. 971-84059)
• The tubes are made of maximum clarity, low-binding virgin polypropylene
• Certified RNase and DNase free
• Sterile tubes (Cat. No. 971-84047) are also pyrogen free
• The 16 mm tube diameter is identical to the diameter of standard 15 mL tubes, which insures compatibility with standard centrifuge rotors, dry bath blocks, tube racks, and thermal shakers/vortexers
• The potential contamination of pipettor shafts is greatly reduced because the 56 mm total tube length (vs. 120 mm for standard 15 mL tubes) is short enough for standard 1 mL or 5 mL tips to reach the tube's conical bottom
• Compatible with standard equipment
• Withstands up to 25,000 x g†
• Dual graduations at every 0.2 mL and 0.5 mL
†When properly supported in appropriate rotor
Image(s) are representative of the product group and not necessarily the individual product.
• These polypropylene tubes come with an attached cap that not only provides a tight, leak proof seal, it can also be effortlessly opened (or closed) with one hand
• The cap is designed to provide a secure seal from -86 to +80°
• At temperatures above 80°C use of a CapLock Clip* is recommended (available separately, Cat. No. 971-84059)
• The tubes are made of maximum clarity, low-binding virgin polypropylene
• Certified RNase and DNase free
• Sterile tubes (Cat. No. 971-84047) are also pyrogen free
• The 16 mm tube diameter is identical to the diameter of standard 15 mL tubes, which insures compatibility with standard centrifuge rotors, dry bath blocks, tube racks, and thermal shakers/vortexers
• The potential contamination of pipettor shafts is greatly reduced because the 56 mm total tube length (vs. 120 mm for standard 15 mL tubes) is short enough for standard 1 mL or 5 mL tips to reach the tube's conical bottom
• Compatible with standard equipment
• Withstands up to 25,000 x g†
• Dual graduations at every 0.2 mL and 0.5 mL
†When properly supported in appropriate rotor
Image(s) are representative of the product group and not necessarily the individual product.
Certificates Of Analysis
This service is currently unavailable!
