Q-Leap Adhesive Mats
• Manufactured in a cleanroom environment; from film extrusion, to adhesive coating, to cutting and packaging
• Each layer of polyethylene film is 100% coated with a consistent application of ester adhesive free of bubbles and wrinkles
• Each individual layer is numbered 1 through 30 or 1 through 60
• Mat has straight, non-beveled edges
• Compatible with various frames or can be placed directly on the floor
• Backing of mat is coated with an adhesive that adheres to floors; can be easily changed without leaving a residue
Specifications:
• Basis weight: 0.48 pounds/ft.2 (60 layers)
• Mat thickness: 0.4 mil.
• Peel adhesion: 400 +/- 50 g/25 mm
• Tensile strength: 1.5 Kg/cm2 (15 Mpa)
Image(s) are representative of the product group and not necessarily the individual product.
Read More
• Each layer of polyethylene film is 100% coated with a consistent application of ester adhesive free of bubbles and wrinkles
• Each individual layer is numbered 1 through 30 or 1 through 60
• Mat has straight, non-beveled edges
• Compatible with various frames or can be placed directly on the floor
• Backing of mat is coated with an adhesive that adheres to floors; can be easily changed without leaving a residue
Specifications:
• Basis weight: 0.48 pounds/ft.2 (60 layers)
• Mat thickness: 0.4 mil.
• Peel adhesion: 400 +/- 50 g/25 mm
• Tensile strength: 1.5 Kg/cm2 (15 Mpa)
Image(s) are representative of the product group and not necessarily the individual product.
• Manufactured in a cleanroom environment; from film extrusion, to adhesive coating, to cutting and packaging
• Each layer of polyethylene film is 100% coated with a consistent application of ester adhesive free of bubbles and wrinkles
• Each individual layer is numbered 1 through 30 or 1 through 60
• Mat has straight, non-beveled edges
• Compatible with various frames or can be placed directly on the floor
• Backing of mat is coated with an adhesive that adheres to floors; can be easily changed without leaving a residue
Specifications:
• Basis weight: 0.48 pounds/ft.2 (60 layers)
• Mat thickness: 0.4 mil.
• Peel adhesion: 400 +/- 50 g/25 mm
• Tensile strength: 1.5 Kg/cm2 (15 Mpa)
Image(s) are representative of the product group and not necessarily the individual product.
• Each layer of polyethylene film is 100% coated with a consistent application of ester adhesive free of bubbles and wrinkles
• Each individual layer is numbered 1 through 30 or 1 through 60
• Mat has straight, non-beveled edges
• Compatible with various frames or can be placed directly on the floor
• Backing of mat is coated with an adhesive that adheres to floors; can be easily changed without leaving a residue
Specifications:
• Basis weight: 0.48 pounds/ft.2 (60 layers)
• Mat thickness: 0.4 mil.
• Peel adhesion: 400 +/- 50 g/25 mm
• Tensile strength: 1.5 Kg/cm2 (15 Mpa)
Image(s) are representative of the product group and not necessarily the individual product.
Certificates Of Analysis
This service is currently unavailable!